|
Molten Metal Pumps |
|
Scrap Submergence |
|
Degassing |
|
Casting Rings |
|
Contact Us |
|
Home |
|
Molten Metal Equipment Innovations |
|
Tel: +1 (440) 632-9119 ● Fax: +1 (440) 632-9187 ● E-mail: info@mmei-inc.com |
|
Circulation Pumps for Molten Metal ¨ Circulates the molten metal quickly and effectively throughout furnace ¨ Significantly increases melt rates while reducing energy consumption ¨ Eliminates temperature stratification and hot spots in the furnace ¨ Perfect for mixing metal for fast alloying and homoginization ¨ For molten aluminum, zinc, and other non-ferrous metals |
|
Gas Injection Pumps for Molten Metal ¨ Excellent choice for efficient injection of gas into the molten metal ¨ Can be used to demag or degas metal ¨ Treat metal faster and more thoroughly - flow of metal shears gas into small bubbles for better reaction ¨ Increases productivity of furnace ¨ Includes all the benefits of a circulation pump |
|
Traditional Transfer Pump with Lined Piping ¨ Safely transfers molten metal ¨ Increase flow rates, reduce transfer times and improve productivity ¨ Capable of delivering metal to high heights ¨ Very reliable metal delivery ¨ Lower heat loss during transfer ¨ Pump through lined pipe, into troughs or into ladles ¨ Available with air or electric motors |
|
¨ Safely transfers molten metal ¨ Increase flow rates, reduce transfer times and improve productivity ¨ Capable of delivering metal to high heights ¨ Very reliable metal delivery ¨ Lower heat loss during transfer ¨ Pump through lined pipe, into troughs or into ladles ¨ Available with air or electric motors |
|
¨ Safely transfers molten metal ¨ Increase flow rates, reduce transfer times and improve productivity ¨ Capable of delivering metal to high heights ¨ Very reliable metal delivery ¨ Lower heat loss during transfer ¨ Pump through lined pipe, into troughs or into ladles ¨ Available with air or electric motors |
|
Refractory Lined Transfer Piping ¨ Refractory lined transfer piping for use with all MMEI transfer pumps ¨ Laminate and cast lined pipe available ¨ Laminate liner can be replaced ¨ Sch. 40 steel pipe used ¨ Available in lengths up to 48” ¨ Almost any angle elbow available ¨ Contact us to determine your piping configuration |
|
¨ Safely transfers molten metal ¨ Increase flow rates, reduce transfer times and improve productivity ¨ Very reliable metal delivery ¨ Lower heat loss during transfer ¨ Available with air or electric motors
|
